Skip to content
Eden Restaurant Supply
Cart 0

Hoshizaki B-250SF 30" 250 lb Stainless Steel Ice Storage Bin

B-250SF
Hoshizaki B-250SF 30" 250 lb Stainless Steel Ice Storage Bin
Hoshizaki B-250SF 30" 250 lb Stainless Steel Ice Storage Bin
Hoshizaki B-250SF 30" 250 lb Stainless Steel Ice Storage Bin

Hoshizaki B-250SF unpowered ice storage bin with 250 lb application storage, 10.30 cu. ft. interior volume and a 30-inch-wide stainless steel exterior. Polyethylene liner, insulated walls and bottom, adjustable legs and a ¾-inch FPT drain. Ice machine and required top kits sold separately.

In Stock
Shipping calculated at checkout.

Product overview

The Hoshizaki B-250SF provides 250 lb of application ice storage in a 30-inch-wide stainless steel bin. A polyethylene liner and foamed-in-place polyurethane insulation in the walls and bottom help preserve ice between production and service. The front-opening, top-hinged door provides access beneath a compatible ice machine.

This is an unpowered storage bin, not an ice maker or refrigerated cabinet. The ice machine and any required top kits are purchased separately. Select the exact machine-and-bin combination before ordering; matching widths alone does not establish compatibility.

  • 250 lb application storage: 10.30 cu. ft. interior volume.
  • 30-inch width: Stainless steel exterior with polyethylene liner.
  • Insulated storage: Polyurethane insulation in every wall and the bottom.

Specifications

Model B-250SF
Equipment type Unpowered insulated ice storage bin
Application ice storage capacity 250 lb
Interior volume 10.30 cu. ft.
Exterior width 30 inches
Interior dimensions (W × D × H) 27 × 27.7 × 23.7 inches
Exterior finish Stainless steel
Liner Polyethylene
Insulation Foamed-in-place polyurethane in the walls and bottom
Access Top-hinged, front-opening door
Legs Four adjustable legs; 6-inch nominal height
Drain outlet ¾-inch FPT

Choose an ice machine and top kit

Match the complete ice-machine model, ice-drop position, bin-control sensing area and required adapters using the application matrix. B-SF and BD-SF bins have different ice-drop arrangements; do not substitute one for the other based on the cabinet dimensions.

For the standard-depth 22-inch KM-350M, KM-520M and KM-660M group, use HS-2033 with this bin. Other machine groups use different adapters or are not compatible. Check the full model and current kit instructions with your installer; ice machines and kits are sold separately.

Positioning and drainage

Have a qualified installer level the bin front to back and side to side, secure the ice machine to the bin, and keep adapters clear of the bin-control sensor. Allow access for the door, cleaning and service. Confirm the complete assembled dimensions and the selected ice machine’s required clearances before fitting the installation into a close opening.

For installations using the linked KM-350/420/520/660 manual, run the bin drain separately from the ice-machine and water-cooled condenser drains. Use at least ¾-inch nominal-ID hard pipe or equivalent, a vented tee and a ¼-inch fall per foot on horizontal runs. Maintain at least a 2-inch vertical air gap above the floor drain. Follow local plumbing requirements and the instructions supplied with the actual installed machine.

Cleaning and sanitation

Use the cleaning and sanitizing procedure for the complete installed ice-machine and bin system. For the linked KM system, wash the scoop daily with a neutral cleaner and rinse thoroughly. Wipe the bin door and the underside of the ice machine and top kit monthly with a clean cloth and warm water. Clean and sanitize the bin at least yearly, or more often when conditions or local sanitation rules require. Follow the installed machine’s shutdown and power-isolation instructions before service.

Limited warranty

January 2012-and-later production carries a three-year limited parts-and-labor warranty for the original owner/user, subject to proper installation, use, maintenance and the written terms. Complete registration within 30 days of installation. Coverage includes standard straight-time labor at the product location; travel, mileage and premium charges are excluded. Coverage applies in the United States, Canada, Puerto Rico and U.S. territories. Read the complete warranty for exclusions and claim requirements.

Compare B-SF storage bins

Choose storage capacity and cabinet width for the ice demand and available space. Each model is sold separately; its ice-machine pairing and top-kit requirements must be checked individually.

Product documents