Hoshizaki CC80-S 80" Stainless Steel Slide-Top Bottle Cooler

Product overview

Keep bottled and canned drinks organized for bar service with the Hoshizaki CC80-S slide-top bottle cooler. The 80-inch-wide cabinet has 3 lockable stainless steel sliding lids and 6 adjustable gray epoxy-coated bin dividers. Its stainless steel exterior surrounds a stainless steel interior, with a heavy-duty 18-gauge stainless steel top.

A bottle opener and cap catcher keep opening and collecting caps together at the cabinet. The electronic controller displays temperature in °F or °C. Front-breathing, side-mounted refrigeration slides out from the front for cleaning and service, and an interior floor drain supports cleaning.

• ▥ 3 locking slide lids: Stainless steel lids provide top access.
• ▤ 6 adjustable dividers: Gray epoxy-coated dividers separate beverage stock.
• ◇ 24.67 cu. ft. capacity: 80-inch-wide cabinet with a stainless steel exterior.

Specifications

Beverage storage and loading

Use the cooler for bottled or canned beverages in sealed containers. Adjust the dividers to separate the drinks you stock, and leave room between containers for air circulation. Keep products at least 2 inches from the front, back and sides, and keep air inlets, outlets and the front grille clear. Do not tightly pack the cabinet or place drinks directly beside the air outlet, where they can freeze and break.

Keep the sliding lids closed between uses. Do not store unpackaged products, chemicals or medical supplies in the cooler. Keep objects and moisture off the cabinet top, and do not climb or stand on the unit.

Installation and electrical supply

Install indoors on a firm, level floor that supports the loaded cabinet. Keep it away from ovens, grills, corrosive environments and other high-heat sources. Leave at least 2 inches between the cabinet and walls, keep front ventilation open and allow access for service. Include the rear bumper, cap catcher and any optional caster kit when checking the finished installation envelope.

Have a qualified installer check the delivered nameplate, supply and local requirements. Connect the NEMA 5-15P plug to an independent, properly grounded outlet. Do not use an extension cord or remove the grounding prong. If GFCI protection is required, use a GFCI breaker rather than a GFCI receptacle. R-290 is flammable; keep ignition sources away and leave refrigeration-system work to qualified personnel.

Cleaning and maintenance

Move beverages to another clean refrigerator, switch the cooler off and unplug it before maintenance. Inspect the condenser for dust and grease and clean it with a brush or vacuum as needed. Keep the front grille clear and do not add filter material in front of the condenser.

Clean stainless steel with soap and water or a non-abrasive, non-chloride cleaner. Wipe spills promptly with a soft cloth. Avoid acids, chlorine bleach, steel wool, sharp tools and high-pressure water. Keep electrical parts dry. After the condensing unit is returned following service, ensure its drain pipe is positioned over the drain pan.

Options and model selection

Caster-and-rail kits are available separately. Confirm the correct kit and installed height for the selected cooler before ordering. The -S stainless steel exterior is made to order; confirm availability and lead time.

Compare CC bottle coolers

Choose a 50.5-, 65.5-, 80- or 95-inch-wide cooler with a black vinyl or stainless steel exterior. Capacity, lid count and divider count vary by model. Each cooler is sold separately.

CC50 · CC50-S

CC65 · CC65-S

CC80 · CC80-S

CC95 · CC95-S

Product documents

• CC Series Specification Sheet
• BB, CC and DD Series Instruction Manual
• CC Series Service Manual
• Limited Warranty