Hoshizaki DM-200B 30" 200 lb Countertop Ice and Water Dispenser

Product overview

The Hoshizaki DM-200B stores and dispenses crescent ice and water, with a 200 lb nominal storage capacity and a dispensing rate of 7.5 lb per minute. Separate front buttons operate the ice auger and water outlet. Fill it manually or pair it with an exactly matched, separately sold crescent ice maker; the dispenser does not produce ice.

A single auger agitator dispenses individual cubes. The stainless-steel exterior surrounds a seamless polyethylene liner with foamed-in-place polyurethane insulation, including the bottom. Four-inch legs and the SD-200 stand are optional and sold separately.

• ▤ 200 lb storage — Nominal storage capacity; no ice-making system.
• ❄ 7.5 lb per minute — Crescent ice dispensing rate.
• ⚡ 115 V power — Supplied eight-foot grounded power cord.

Specifications

Installation and utilities

Install indoors on a firm, level surface away from ovens, grills and other heat sources. Leave at least 24 inches above the dispenser for manual filling and six inches at the right side for drive access in a permanent installation. Verify the complete cabinet envelope before fitting cabinetry. Optional legs, the stand, an ice maker and rear connections add to the installation space.

Level the unit front-to-back and side-to-side. Optional legs adjust from four to five inches. Without legs, seal the cabinet perimeter to the countertop while keeping the right-side panel accessible. Have a qualified installer follow the selected head’s mounting and ice-level-control instructions.

Use a compatible grounded 115 V, 15 A outlet. Provide potable water with shutoff and drain valves; reduce pressure above 113 PSIG. The ¾-inch drain requires a vented tee, at least ¼-inch fall per foot on horizontal runs and a minimum two-inch vertical air gap to an approved floor drain. Do not connect directly to the sewer. If GFCI protection is required, use a GFCI breaker rather than a GFCI receptacle. Installation and service must follow national and local codes.

Compatible ice makers and accessories

The DM-200B accepts compatible crescent ice heads. The top-kit matrix pairs 22-inch KM-350M, KM-520M and KM-660M units with HS-2036, and compatible 30-inch KML units without a top kit. Match the exact model and generation before ordering. The ice maker and any top kit are sold separately; the shallow KMD option for DB-200H does not apply to this dispenser.

Cleaning and care

Clean the dispenser at least annually and more often when water or sanitation conditions require it. Unplug before cleaning or service. Follow the manual’s separate cleaning, sanitizing and rinsing steps for the bin, auger, cover, spout and shutter, using protective gloves and no ammonia-type cleaner. Wipe the exterior with a soft cloth and neutral cleaner. For extended shutdown, remove ice, clean and dry the bin, and have the water line drained to protect against freezing.

Warranty

Three-year parts-and-labor coverage applies to eligible DM dispensers in the United States, Canada, Puerto Rico and U.S. territories, subject to the written warranty, proper installation and maintenance. Register within 30 days of installation. Any separately sold ice maker has its own warranty.

Compare DM dispensers

DM-4420N — cubelet ice, push lever · DM-200B — crescent ice, push buttons

Manufacturer documents

• Specification sheet
• Installation and care instructions
• Parts manual
• Warranty terms
• Ice machine and bin top-kit matrix