Hoshizaki PR67B-Z 67" 9-Pan Stainless Steel Pizza Prep Refrigerator

Product overview

The Hoshizaki PR67B-Z puts a raised refrigerated ingredient rail above 19.29 cu. ft. of lower storage with 2 solid doors. Its 67-inch-wide cabinet brings chilled toppings and backup ingredients together at the pizza-preparation station.

An elevated hood provides room for upright sauce bottles. Three speed grates and three catch trays support the work area, with storage above the rail for the catch-tray covers. Separate cabinet and rail controls and automatic day/night switching help manage the rail during service and when its covers are closed.

• ▤ 19.29 cu. ft. AHAM capacity: 2 solid doors.
• ↔ 67-inch width: Speed grates and catch trays.
• ϟ 115V connection: NEMA 5-15P plug and 10-foot cord.

Specifications

Rail setup and ingredient storage

The raised rail includes third-size polycarbonate pans and dividers. Keep the entire rail covered by correctly fitted pans and dividers, with no gaps, so cooled air remains in the ingredient area. Use pans no deeper than 6 inches. Match optional pan sizes and divider kits to the exact rail configuration.

Pre-chill ingredients to 37°F or below before placing them in the rail. Keep rail covers closed when not actively preparing food. For extended non-active periods, wrap the ingredient pans as well as closing the covers, or move sealed ingredients to appropriate cold storage. Do not tightly pack the lower cabinet; leave room around containers and air outlets for circulation.

Day and night use

During service, place the speed grates above the catch trays and store the catch-tray covers above the rail. For non-active periods, wrap the food pans, remove and clean the catch trays, replace their covers and store the grates above the rail. Close the rail covers to activate night mode and reduce the risk of ingredients freezing overnight.

Installation and connections

Install indoors on a firm, level floor away from ovens, grills and other high-heat equipment. Keep the front ventilation openings accessible and retain the factory rear bumpers. Confirm operating-room temperature, side and rear clearance, and space for opening the rail covers against the supplied installation manual before placing the unit.

Install the four casters beneath the cabinet area in the specified positions; do not mount casters beneath the refrigeration compartment. Leave the rear ventilation clearance specified in the supplied instructions.

Lock the front casters after positioning. Provide a properly grounded, independent 115V outlet matching the NEMA 5-15P plug. Do not use an extension cord. If GFCI protection is required, use a GFCI breaker rather than a GFCI receptacle. R290 is flammable; provide at least 3.6 m² (39.1 sq. ft.) of room floor area and have a qualified installer check the delivered-unit nameplate and applicable installation requirements.

Cleaning and maintenance

Move food to suitable cold storage and unplug the unit before cleaning. Wipe the exterior with a soft cloth and a neutral cleaner suitable for stainless steel. Clean the cabinet interior and door or drawer gaskets with mild soap and warm water. Do not spray water into the appliance or use steel wool, abrasive products or chlorine bleach.

Remove rail pans and dividers daily to wipe the rail and air-duct area with mild soap and warm water, then wipe with clean water. Follow the supplied weekly air-duct removal and cleaning procedure. Inspect the air filter every two weeks and wash it when dirty. Inspect and clean the condenser at least twice a year, more often in demanding conditions.

Compare Steelheart pizza prep refrigerators

Choose the width and lower storage layout for the preparation line. The PR67B-Z uses speed grates and catch trays beneath an elevated hood; the other models below use polyethylene cutting boards. Models are sold separately. Check each model’s installed dimensions, rail and drawer configuration before ordering.

Product documents

• PR67B-Z specification sheet
• Installation, operation and care manual
• Parts manual
• Complete limited warranty terms