Hoshizaki PT2A-FG-FG 55" Full Glass Door Pass-Thru Refrigerator
PT2A-FG-FG
Product overview
The Hoshizaki PT2A-FG-FG Steelheart pass-through refrigerator provides 52.5 cu. ft. of refrigerated storage with access from both sides of the cabinet. Its two-section layout has 4 full-height glass doors—2 on each side—so loading and retrieval can take place from opposite work areas.
Glass panels keep stored items visible before the doors are opened. 6 adjustable epoxy-coated wire shelves support flexible storage, while interior LED lighting helps staff locate items. Stainless steel interior surfaces and exterior front, sides and top suit daily commercial use.
- 52.5 cu. ft. AHAM capacity: Two sections with front and back access.
- Full-height glass, anodized aluminum frame doors: Argon-filled multi-pane glass and standard locks.
- 115V plug-in connection: 8A rated current; NEMA 5-15P plug on a 10-foot cord.
Specifications
| Model | PT2A-FG-FG |
|---|---|
| Series | Hoshizaki Steelheart |
| Configuration | Two-section pass-through refrigerator |
| Door configuration | 4 full-height glass, anodized aluminum frame doors; 2 per side |
| Interior capacity (AHAM) | 52.5 cu. ft. |
| Overall dimensions (W × D × H) | 55 × 37.75 × 79.5 inches; height includes standard 4-inch casters |
| Cabinet construction | Stainless steel interior and exterior front, sides and top |
| Insulation | 2⅜-inch CFC-free foamed-in-place polyurethane |
| Adjustable main shelves | 6 epoxy-coated wire shelves; adjustable in 1-inch increments |
| Main shelf dimensions (W × D) | 21.25 × 26 inches |
| Center shelves | Three; 6 × 17.8 inches each |
| Lighting | Interior LED |
| Door locks | Standard |
| Door gaskets | Removable snap-in magnetic gaskets |
| Door operation | Adjustable torsion-spring closure; self-closes at 75°, stays open at 90° |
| Hinging | Field reversible |
| Refrigeration | Top-mounted, self-contained |
| Refrigerant | R290; 5.3 oz (150 g) |
| Evaporator | Epoxy electrocoated (E-Coat) |
| Refrigerant control | Thermostatic expansion valve (TXV) |
| Controller | Digital temperature display in °F or °C; temperature and voltage alarms |
| Control setpoint range | 31–52°F; adjustment range, not a food-holding recommendation |
| Ambient operating range | 45–100°F |
| Electrical supply | 115V / 60Hz / single phase |
| Rated current | 8A |
| HACR breaker | 15A |
| Plug and cord | NEMA 5-15P; 10-foot cord |
| Nominal compressor | ½ HP; 1,545 BTU/hr |
| Energy consumption (ASHRAE) | 6 kWh/day |
| Mobility | Standard 4-inch casters |
| Minimum room floor area | 7.2 m² (77.3 sq. ft.) |
Door access and storage
Silver anodized aluminum door frames and full-length chrome handles distinguish the FG configuration. Multi-pane, argon-filled glass provides visibility, and adjustable torsion-spring hinges close the doors without cam-lift hardware.
Arrange shelving around the containers used in your operation. Keep internal air passages clear so the ducted airflow can circulate around stored products. The self-contained refrigeration system includes an accessible top condenser filter and hot-gas condensate evaporation.
Installation and electrical planning
Install indoors on a level, supporting floor and leave working room for door swing and loading on both sides. Keep ventilation and top filter/service access unobstructed. Minimum cabinet clearance is 0 inches at the sides and top; the rear clearance designation is not applicable to this pass-through layout.
Use a properly grounded, independent 115V outlet and the supplied three-prong plug; do not use an extension cord. Have a qualified installer verify the nameplate, circuit and local installation requirements. If GFCI protection is required, use a GFCI breaker rather than a GFCI receptacle.
R290 is a flammable refrigerant. Provide at least 7.2 m² (77.3 sq. ft.) of room floor area and do not install this unit in a public corridor or lobby. Follow the installation manual for placement and refrigerant safety requirements. Choose the operating setpoint for the food being stored, rather than treating the controller’s full adjustment range as suitable for every food.
Cleaning and maintenance
Move food to another refrigerator, switch the unit off and unplug it before cleaning. Clean the cabinet and removable door gaskets with suitable mild cleaning products; avoid damaging the stainless steel surfaces or refrigeration tubing. Inspect the air filter at least twice a month and wash it with warm water and neutral cleaner when dirty. Inspect the condenser twice a year; clean it at least annually and sooner as needed. Clean the condenser wick at least annually. Busier or dustier kitchens may need more frequent maintenance. Refrigeration service should be performed by qualified technicians.
Compare Steelheart pass-through refrigerators
Choose the cabinet width, door construction and access pattern that fit your workflow. These are separate models, not included companion units. Dimensions below include the standard casters.
| Model | Doors, capacity & dimensions |
|---|---|
| PT1A-FS-FS | Full-height stainless steel; 24.2 cu. ft.; 27.5 × 35.75 × 79.5 inches |
| PT1A-HS-HS | Half-height stainless steel; 24.2 cu. ft.; 27.5 × 35.75 × 79.5 inches |
| PT1A-FG-FG | Full-height glass, anodized aluminum frame; 24.2 cu. ft.; 27.5 × 37.75 × 79.5 inches |
| PT2A-FS-FS | Full-height stainless steel; 52.5 cu. ft.; 55 × 35.75 × 79.5 inches |
| PT2A-HS-HS | Half-height stainless steel; 52.5 cu. ft.; 55 × 35.75 × 79.5 inches |
| PT2A-FG-FG | Full-height glass, anodized aluminum frame; 52.5 cu. ft.; 55 × 37.75 × 79.5 inches |
| PT1A-FGE-FGE | Full-height glass, stainless steel frame; 24.2 cu. ft.; 27.5 × 35.75 × 79.5 inches |
| PT2A-FGE-FGE | Full-height glass, stainless steel frame; 52.5 cu. ft.; 55 × 35.75 × 79.5 inches |
Product documents
Hoshizaki PT2A-FG-FG 55" Full Glass Door Pass-Thru Refrigerator images
