Skip to content

Hoshizaki WF48B-D2 48-inch stainless steel worktop freezer with 12 cu. ft. AHAM capacity, one door and two drawers. A 36-inch work surface and 4-inch backsplash sit above the frozen storage compartment. Front-breathing refrigeration; 115V with NEMA 5-15P plug.

In Stock
Shipping calculated at checkout.

Product overview

The Hoshizaki WF48B-D2 combines 12 cu. ft. of frozen storage with a 48-inch stainless steel worktop. A door compartment and two drawers combine shelf storage with pan-organized access.

A 36-inch work-surface height and 4-inch backsplash create a defined preparation area above the freezer. Front-breathing, self-contained refrigeration suits a continuous kitchen equipment line, with the rear bumper and overhead ventilation space kept clear.

  • 12 cu. ft. AHAM capacity: One door and two drawers.
  • 48-inch worktop: Stainless steel surface with 4-inch backsplash.
  • 115V connection: NEMA 5-15P plug and 10-foot cord.

Specifications

Model WF48B-D2
Series Hoshizaki Steelheart
Configuration Worktop freezer; one door and two drawers
Capacity (AHAM) 12 cu. ft.
Overall dimensions (W × D × H) 48 × 31 × 40 inches; depth includes 1-inch rear bumper
Cabinet body depth 30 inches, excluding rear bumper
Work-surface height 36 inches
Backsplash height 4 inches
Cabinet construction Stainless steel exterior front, sides and top; stainless steel interior top, sides, back and floor; coated steel exterior back and bottom
Insulation 2-inch CFC-free foamed-in-place polyurethane
Handles Extruded aluminum, flush mount
Gaskets Removable magnetic gaskets
Refrigeration Self-contained, front-breathing
Refrigerant R290
Evaporator E-coated
Defrost Automatic heated defrost
Condensate removal Non-electric evaporation system
Control setpoint range −10°F to +10°F
Ambient operating range 45–100°F
Electrical supply 115V / 60Hz / single phase
Amperage 4 A
HACR breaker 15 A
Plug and cord NEMA 5-15P; 10-foot cord
Energy consumption (ASHRAE) 3.6 kWh/day
Minimum overhead clearance 1.5 inches; maintain ventilation access
Rear clearance Retain the factory-installed 1-inch rear bumper
Shelves 1 epoxy-coated shelf; adjustable in ½-inch increments
Shelf dimensions (W × D) 21.5 × 16 inches
Door construction Stainless steel exterior; ABS interior liner
Door operation Field-reversible hinging; spring-assisted self-closing with stay-open feature past 90°
Depth with door open 90° 52.5 inches, including rear bumper
Drawers 2
Drawer construction Stainless steel inside and out; stainless steel slides with acetal rollers
Drawer slide dynamic load rating 175 lb; applies to the drawer slide system
Depth with drawers fully open 52 inches, including rear bumper

Pan storage and access

Each drawer accepts one half-size and one third-size pan. The upper drawer also has rear space for one quarter-size and one sixth-size pan, with 6-inch pan depth throughout this arrangement. The HS-5432 divider bar supports this configuration. Confirm pan inclusion, divider bars and pan layout with the selected configuration before ordering.

The separate door compartment includes one adjustable shelf for containers that do not need a drawer layout. Specify the required door-and-drawer arrangement when ordering.

Installation and electrical planning

Install indoors on a firm, level floor, away from ovens, grills and other high-heat equipment. Keep the factory rear bumper in place and allow at least 1.5 inches above the cabinet for ventilation. Keep the front airflow path clear, and check the delivery route and fully open drawer depth before ordering.

Provide an independent, properly grounded 115V circuit with a matching NEMA 5-15P receptacle. Have a qualified installer check the delivered-unit nameplate and installation manual. Do not use an extension cord. If GFCI protection is required, use a GFCI breaker rather than a GFCI receptacle. R290 is flammable; follow the manual’s room-size and placement requirements and keep ignition sources away.

Cleaning and maintenance

Move frozen food into suitable cold storage, turn the unit off and unplug it before cleaning. Wipe stainless steel and gaskets with a soft cloth and neutral cleaner, then dry the surfaces. Avoid abrasive pads, acids and chlorine bleach. Inspect the condenser twice a year and clean it with a brush or vacuum when needed. Keep drainage and airflow paths clear, and use qualified technicians for refrigeration service.

Compare Steelheart worktop freezers

Choose the cabinet width and storage access that fit the preparation area: adjustable door compartments, pan drawers, or a combination. The -01 models include factory-installed cylinder locks. Models are sold separately; check the selected model’s capacity, opening depth and installation requirements.

Model Storage access Width
WF27B One door 27 inches
WF27B-01 One door; factory-installed cylinder locks 27 inches
WF27B-D2 Two drawers 27 inches
WF48B Two doors 48 inches
WF48B-D4 Four drawers 48 inches
WF48B-01 Two doors; factory-installed cylinder locks 48 inches
WF60B Two doors 60 inches
WF60B-01 Two doors; factory-installed cylinder locks 60 inches
WF48B-D2 One door and two drawers 48 inches

Product documents