Hoshizaki WR60B-01 60" Stainless Steel Worktop Refrigerator with Lock
WR60B-01
Product overview
The Hoshizaki WR60B-01 combines 15.1 cu. ft. of refrigerated storage with a 60-inch stainless steel worktop. Adjustable shelving holds containers and ingredients behind 2 doors. Factory-installed cylinder locks secure the door compartments.
A raised rear backsplash borders the work surface. Front-breathing, self-contained refrigeration keeps the storage and preparation area together while the front airflow path, rear bumper and overhead ventilation space remain clear.
- 15.1 cu. ft. AHAM capacity: Two doors; factory-installed cylinder locks.
- 60-inch worktop: Stainless steel surface with rear backsplash.
- 115V connection: NEMA 5-15P plug and 10-foot cord.
Specifications
| Model | WR60B-01 |
|---|---|
| Series | Hoshizaki Steelheart |
| Configuration | Worktop refrigerator; two doors; factory-installed cylinder locks |
| Capacity (AHAM) | 15.1 cu. ft. |
| Overall dimensions (W × D × H) | 60 × 31 × 40 inches; depth includes 1-inch rear bumper |
| Cabinet body depth | 30 inches, excluding rear bumper |
| Work-surface height | 36 inches |
| Backsplash height | 4 inches |
| Cabinet construction | Stainless steel exterior front, sides and top; coated-steel exterior back and bottom; stainless steel interior back, sides and floor with ABS ceiling |
| Insulation | 2-inch CFC-free foamed-in-place polyurethane |
| Handles | Extruded aluminum, flush mount |
| Gaskets | Removable magnetic gaskets |
| Refrigeration | Self-contained, front-breathing |
| Refrigerant | R290 |
| Evaporator | E-coated |
| Defrost | Off-cycle |
| Condensate removal | Non-electric evaporation system |
| Control setpoint range | 32°F to 52°F |
| Ambient operating range | 45–100°F |
| Electrical supply | 115V / 60Hz / single phase |
| Amperage | 3 A |
| HACR breaker | 15 A |
| Plug and cord | NEMA 5-15P; 10-foot cord |
| Energy consumption (ASHRAE) | 0.927 kWh/day |
| Minimum overhead clearance | 1.5 inches; maintain ventilation access |
| Rear clearance | Retain the factory-installed 1-inch rear bumper |
| Shelves | 2 epoxy-coated shelves; adjustable in ½-inch increments |
| Shelf dimensions (W × D) | 27.25 × 16 inches |
| Door construction | Stainless steel exterior; ABS interior liner |
| Door operation | field-reversible hinging; spring-assisted self-closing with stay-open feature past 90° |
| Depth with door open 90° | 58.5 inches, including rear bumper |
| Door locks | Factory-installed cylinder locks |
| Casters | Standard 6-inch casters; two with brakes |
Storage access
Anodized aluminum shelf supports let you change shelf height in ½-inch increments. The stepped door design helps protect the gasket during loading. The stay-open feature supports restocking, while spring-assisted closing returns the door after routine access.
Installation and electrical planning
Install indoors on a firm, level floor, away from ovens, grills and other high-heat equipment. Keep the factory rear bumper in place and allow at least 1.5 inches above the cabinet for ventilation. Check the delivery route, open-door and drawer clearances, and the ordered caster configuration before installation.
Provide an independent, properly grounded 115V circuit with a matching NEMA 5-15P receptacle. Have a qualified installer check the delivered-unit nameplate and installation manual. Do not use an extension cord. If GFCI protection is required, use a GFCI breaker rather than a GFCI receptacle. R290 is flammable; follow the manual’s room-size and placement requirements and keep ignition sources away.
Cleaning and maintenance
Move food into suitable refrigerated storage, turn the unit off and unplug it before cleaning. Wipe stainless steel and gaskets with a soft cloth and neutral cleaner, then dry the surfaces. Avoid abrasive pads, acids and chlorine bleach. Inspect the condenser twice a year and clean it with a brush or vacuum when needed. Keep drainage and airflow paths clear, and use qualified technicians for refrigeration service.
Compare Steelheart worktop refrigerators
Choose cabinet width and storage access to suit the preparation area: adjustable door compartments, pan drawers, or a combination. The -01 models include factory-installed cylinder locks; WR27B-L supplies the left-hinge configuration. Models are sold separately; compare the selected model’s capacity, opening depth and installation requirements.
| Model | Storage access | Width |
|---|---|---|
| WR27B | One door | 27 inches |
| WR27B-01 | One door; factory-installed cylinder locks | 27 inches |
| WR27B-D2 | 2 drawers | 27 inches |
| WR36B | One door | 36 inches |
| WR36B-01 | One door; factory-installed cylinder locks | 36 inches |
| WR48B | Two doors | 48 inches |
| WR48B-01 | Two doors; factory-installed cylinder locks | 48 inches |
| WR48B-D2 | One door and two drawers | 48 inches |
| WR48B-D4 | 4 drawers | 48 inches |
| WR60B | Two doors | 60 inches |
| WR60B-01 | Two doors; factory-installed cylinder locks | 60 inches |
| WR60B-D2 | One door and two drawers | 60 inches |
| WR60B-D4 | 4 drawers | 60 inches |
| WR72B | Three doors | 72 inches |
| WR72B-01 | Three doors; factory-installed cylinder locks | 72 inches |
| WR72B-D6 | 6 drawers | 72 inches |
| WR27B-L | One door; left-hinge configuration | 27 inches |
Product documents
Hoshizaki WR60B-01 60" Stainless Steel Worktop Refrigerator with Lock images
