Skip to content

Turbo Air TBD-3SB-N direct-draw beer dispenser for 3 half-barrel kegs, with 2 swing doors, a four-way tapper manifold and insulated stainless steel beer tower. Holds 33–38°F; stainless steel countertop and forced-air cooling.

In Stock
Shipping calculated at checkout.

Product overview

The Turbo Air TBD-3SB-N direct-draw beer dispenser holds 3 half-barrel kegs behind 2 swing doors. A four-way tapper manifold and insulated stainless steel beer tower support draft service, while forced-air cooling maintains a 33–38°F cabinet range.

  • Keg capacity: 3 half-barrel kegs.
  • Holding range: 33–38°F.
  • Draft manifold: Four-way tapper manifold.

Features and specifications

Self-cleaning condenser
Daily automatic brushing keeps the condenser clean to help prevent reduced cooling, equipment breakdown and stored-product damage from dust buildup.


Hydrocarbon refrigerants (R-290)
These hydrocarbon refrigerators are designed to meet DOE's Energy Conservation Standards in 2017 and to use EPA's SNAP Program approved HC refrigerants. Hydrocarbon refrigerants do not deplete the ozone layer and have very low contribution to global warming (ODP-0, GWP-3).


Stainless steel cabinet construction
Super Deluxe (SD) models boast a stainless steel exterior (except galvanized steel back and bottom). SB models have a wear-resistant black vinyl exterior. Heavy gauge stainless steel countertop provides a durable, cleanable surface. Interior is stainless steel except galvanized steel top. Spacious inside construction with 32" inner height accommodates various sizes of beer kegs.


Forced air cooling system
Fast cooling and balanced temperature throughout the cabinet.


High-density polyurethane insulation
The entire cabinet structure is foamed-in-place using high density, HCFC free polyurethane insulation.


3" diameter stainless steel insulated beer tower


Door access
Easy-grip handles, smooth-opening doors and self-closing operation provide convenient cabinet access.


Side mount compressor unit


Comes standard with a four-way tapper manifold


Beer dispenser holds 33°F ~ 38°F for the best in beverage preservation


Standard Features
• Anti-corrosion coated evaporator
• Double faucet beer tower standard
• Door locks standard
• Self-contained system
• 4” dia. swivel casters standard


Optional accessories
• 1” caster, ½” diameter & 13 TPI: S28R813660 (non-brake)

• 2” caster for underbar series, ½” diameter: P0165B0100 (non-brake), P0165B0110 (w/ brake)
• 2.5" caster: 30265H0100 (non-brake), 30265H0200 (w/ brake)
• 5” caster, ½” diameter & 13 TPI: M726500100 (non-brake), M726500200 (w/ brake)
• Leveling leg, ½” - 13 TPI x 1.54”: LFM1213566
• 6” adjustable stainless steel leg: P0121P0100
• Triple faucet draft tower: 153A-3


Warning: This product can expose you to chemicals including Bisphenol A(BPA) and Di (2-ethylhexyl) phthalate (DEHP) and
Cobalt sulfate heptahydrate, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, go to www.p65warnings.ca.gov.

  • (2) swing doors
  • (3) 1/2 barrels capacity
  • 115v/60/1
  • NEMA 5-15P
  • 2.5 Amps
  • 1/3 HP

Draft connections and drainage

Use the TBD tower and beer/CO₂ line diagrams for the supplied draft assembly and match the coupler to the actual keg. The front direct-draw drain connects to ⅝-inch PVC pipe at the supplied ⅝-inch barbed fitting. Do not pull or turn the drain line.

Installation and loading

Install indoors on a strong, level floor, away from heat, with at least 5 inches behind the cabinet and clear ventilation. Use a dedicated grounded outlet without an extension cord and keep the plug accessible. Lock fitted front caster brakes. Run the cabinet for 24 hours before loading, and keep the rear interior air inlet clear. Do not use mechanical devices to accelerate defrosting or unapproved electrical appliances inside the storage compartment.

R290 refrigerant is flammable. Keep ignition sources away and protect refrigerant tubing.

Cleaning and care

Unplug before cleaning with warm soapy water and a soft cloth. Avoid abrasives and chlorine-based cleaners on stainless steel. Empty the drain pan periodically and return its hose to the pan. The self-cleaning condenser brush may leave grease; arrange qualified nitrogen cleaning once or twice yearly. Wait five minutes before restarting. Refrigeration repairs require qualified personnel.

Compare keg capacities and finishes

TBD-1SD-N6 · TBD-1SB · TBD-2SD · TBD-2SB-N6 · TBD-3SD-N · TBD-3SB-N · TBD-4SD-N · TBD-4SB-N

Product documents

TBD-3SD / SB hydrocarbon specifications and drawings · TBD installation, operation and care (archived) · Current warranty terms and eligibility