Skip to content
Eden Restaurant Supply
Cart 0

Turbo Air SAS-60R-N 59" Straight Glass Refrigerated Sushi Case - Right Side Condenser

SAS-60R-N
Turbo Air straight-glass refrigerated sushi display case with black cabinet
Turbo Air SAS-60R-N refrigerated sushi display case with empty interior and right-side condenser

Turbo Air SAS-60R-N straight-glass refrigerated sushi case with a right-side condenser viewed from the front. Features chef-side sliding glass doors, stainless steel food plates, LED lighting and digital temperature control, with a 35–41°F holding range.

In Stock
Shipping calculated at checkout.

Product overview

The Turbo Air SAS-60R-N displays sushi behind straight front glass, with a right-side condenser viewed from the customer-facing front. Chef-side sliding glass doors provide access to stainless steel food plates; a digital display and temperature control manage the refrigerated cabinet.

  • Condenser position: Right side, viewed from the front.
  • Holding temperature: 35–41°F.
  • Display lighting: LED interior lighting behind straight front glass.

Construction and display

  • Hydrocarbon refrigerants (R-290) These hydrocarbon refrigerators are designed to meet DOE's Energy Conservation Standards in 2017 and to use EPA's SNAP Program approved HC refrigerants. Hydrocarbon refrigerants do not deplete the ozone layer and have very low contribution to global warming (ODP-0, GWP-3).
  • Refrigerator maintains 35°F ~ 41°F for the best in food preservation
  • Ambient temperature range 50°F ~ 80°F, saturation temperature 39°F
  • Digital temperature display and control
  • Straight front glass for maximum visibility
  • Slightly inclined bottom for better drainage
  • Spacious display interior
  • Stainless steel solid food plates
  • Low-E coated, tempered glass doors with durable plastic door handles at chef side
  • Side mount compressor makes it easy to be serviced without being moved
  • Contemporary Euro-style design
  • Easy-clean, durable construction
  • Right-side condenser, viewed from the front
  • LED interior lighting
  • Recommended operating conditions SAS models are designed to operate in environments where temperature & humidity do not exceed 75°F and 55% relative humidity.

STANDARD FEATURES
Anti-corrosion coated evaporator
Self-contained system
No plumbing required
Simple plug-in installation


Warning: This product can expose you to chemicals including Bisphenol A(BPA) and Di (2-ethylhexyl) phthalate (DEHP) and
Cobalt sulfate heptahydrate, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, go to www.p65warnings.ca.gov.

Specifications

  • Model: SAS-60R-N
  • Condenser: Right side, viewed from the front
  • Published cabinet width: 59 inches (2024–2025 catalog)
  • Exterior dimensions (W × D × H): 59 × 14½ × 13½ inches; depth excludes ⅝-inch drain projection
  • Capacity: 1.9 cu. ft.
  • 4 sliding doors; 5 bottom shelves (11 × 9 inches each)
  • Electrical: 115V / 60Hz / 1 phase; 4.6A; NEMA 5-15P plug; 4⅞-foot cord
  • Refrigeration: self-contained; R-290; 1/6 HP
  • Cabinet temperature: 35°F–41°F
  • Net weight: 148 lb; manufacturer crated/gross weight: 163 lb (2024–2025 catalog)
  • Warranty (U.S.): 2 years parts and labor; 3 additional years compressor coverage

Dimensions, amperage and weights vary between production versions. Confirm the supplied unit’s fit and electrical requirements before counter fabrication. Allow an additional ⅝ inch beyond cabinet depth for the drain projection. Cabinet dimensions exclude crating; actual shipping weight may vary with protective packing.

Manufacturer resources

Placement and electrical connection

Place the case indoors on a level support, away from direct sunlight, HVAC outlets, fans and doorways. Keep ventilation openings clear and have the installer confirm clearance for the supplied unit. Use a dedicated grounded outlet, without an extension cord or adapter. The installation circuit requires at least 20 A with 12 AWG wiring; confirm the delivered rating plate and installation instructions before connection. R290 is flammable: allow at least 1 m³ (35.31 ft³) of room volume per 8 g (0.28 oz) of refrigerant shown on the cabinet label. Keep ignition sources away and protect refrigerant tubing. Do not use mechanical devices to accelerate defrosting or unapproved electrical appliances inside the food compartment.

Loading and controls

Let the cabinet reach the selected temperature before loading, and do not add hot food. Keep products away from the rear wall and suction grille so air can circulate. The power switch, light switch and temperature control are at the top of the rear panel. Press SET for one second to check the setting; use the arrow buttons to adjust it and press SET to finish. Hold DEFROST for three seconds to start manual defrost; it ends automatically, or can be stopped by holding the same button for three seconds.

Cleaning and maintenance

Disconnect power, switch off the lights, remove food and let the cabinet reach room temperature before cleaning. Remove the shelves and bottom trays, wash with warm water and mild detergent, and wipe away soap residue. Do not spray water directly onto the cabinet or wet electrical components. With power disconnected, brush dust and lint from the condenser coil monthly or more often as needed. Wait at least five minutes before reconnecting power. Refrigeration service requires a qualified technician familiar with flammable refrigerants.

Compare SAS sizes and condenser positions

SAS-50R-N · SAS-60R-N · SAS-70R-N · SAS-50L-N · SAS-60L-N · SAS-70L-N

SAS installation, controls and cleaning instructions. Review the current written warranty supplied with the machine for eligibility and coverage.