Hoshizaki BD-300SF 22" 300 lb Stainless Steel Ice Storage Bin

Product overview

The Hoshizaki BD-300SF stores up to 300 lb of ice beneath a compatible shallow-depth ice machine. Its 22-inch-wide stainless steel cabinet has a top-hinged front door, polyethylene liner and foamed-in-place polyurethane insulation in the walls and bottom. This is an unpowered ice storage bin; the ice machine and required adapters are sold separately.

• ▤ 300 lb ice storage: 11.51 cu. ft. interior volume.
• ↔ 22-inch cabinet width: Select the bin and ice-machine combination together.
• ◉ Insulated liner: Polyethylene interior with polyurethane insulation.

Specifications

• Dimensions: 22″ W x 32- 1/2 ” D x 46″ H
• Stores up to 300 lbs of ice
• Capacity based on 11.51 ft3 x 30lbs/ft3 average density of ice
• Stainless steel Exterior Finish
• Protected by H-GUARD Plus Antimicrobial Agent
• Fits 24″ – 24.5″ deep ice machine without top kit extension
• Top-hinged front-opening bin door
• Sturdy construction
• Standard with 6″ Painted Flange Legs
• Optional: Four, 6″ Stainless Steel Flanged Legs – LP-6 FLANGE LEG
• 3/4″ FPT drain
• 135 lbs
• Two Years: Parts & Labor warranty for production before January 2012

Interior dimensions: 19 × 27.7 × 37.6 inches (W × D × H). Storage capacity and interior volume are separate manufacturer ratings; ice production depends on the separately selected machine.

Ice-machine selection

BD-SF bins accommodate shallow-depth heads, but matching cabinet width or depth alone does not establish compatibility. Check the complete ice-machine suffix, ice-drop position, bin control and required adapters before ordering.

The BD-300SF application group includes KMD-410M, KMS-822M, FD-650M-C and FD-1002M-C. Use the exact model instructions and top-kit matrix for the final combination.

Installation and drainage

For a KMD-410M installation, run the storage-bin drain separately from the ice-machine drain and any water-cooled condenser drain. Provide a vented tee, a ¼-inch fall per foot on horizontal runs and a minimum 2-inch vertical air gap above the floor drain. Do not connect the drain directly to the sewer. Have the installer follow applicable plumbing requirements and the KMD-410M installation manual; other approved heads require their own installation instructions.

Cleaning and ice handling

For the KMD-410M system, wash hands before removing ice and use a plastic scoop. Store only ice in the bin. Clean the scoop and liner with a neutral cleaner and rinse thoroughly; wipe the exterior with a soft cloth and neutral cleaner as needed. Follow the selected head’s cleaning and sanitizing procedure before returning the system to service.

Limited warranty

January 2012-and-later production carries a three-year limited parts-and-labor warranty for the original owner/user, subject to proper installation, use and maintenance. Register within 30 days of installation. Standard straight-time labor at the product location is covered; travel, mileage and premium charges are excluded. Read the complete written warranty for coverage territory, exclusions and claim requirements.

Compare BD-SF bins

BD-300SF: 22-inch width, 300 lb storage · BD-500SF: 30-inch width, 500 lb storage. Each bin is sold separately and has its own approved ice-machine combinations.

Product documents

Bin dimensions and application specifications · Ice-machine and top-kit matrix