Turbo Air Super Deluxe Glass and Mug Froster, 24"W

Product overview

The Turbo Air TBC-24SD-GF-N6 chills glasses, mugs and plates at −5 to 15°F in a 4.56-cu.-ft. cabinet. One stainless steel sliding lid opens onto two adjustable PE-coated shelves. The cabinet has a stainless steel exterior with galvanized back and bottom.

• ❄ Glass and mug chilling: −5 to 15°F operating range.
• ▤ Two adjustable shelves: PE-coated storage surfaces.
• ⚡ 115V single-phase: NEMA 5-15P connection.

Cabinet and refrigeration

The self-cleaning condenser brushes away dust daily to help prevent reduced performance, breakdowns and stored-product damage. Direct cooling, manual defrost and a side-mounted compressor support the froster’s chilling operation.

Both finish options have a heavy-gauge stainless steel countertop and glide lid, plus a stainless steel interior with a galvanized top. The SD exterior is stainless steel except for its galvanized back and bottom; the SB exterior is wear-resistant black vinyl. High-density, HCFC-free polyurethane insulation is foamed into the cabinet structure. Heavy-duty, 10 mm-thick shelves have a pure-grade PE coating.

R600a hydrocarbon refrigeration is designed to meet 2017 DOE energy-conservation standards and uses an EPA SNAP-approved refrigerant with zero ozone-depletion potential and a global-warming potential of 3.

Standard Features
• Anti-corrosion coated evaporator
• Self-contained system
• Standard 4” dia. swivel casters with locks on the front set

Optional Accessories
• 1” caster, ½” diameter & 13 TPI: S28R813660 (non-brake)
• 2” caster for underbar series, ½” diameter: P0165B0100 (non-brake), P0165B0110 (w/ brake)
• 2.5" caster: 30265H0100 (non-brake), 30265H0200 (w/ brake)
• 5” caster, ½” diameter & 13 TPI: M726500100 (non-brake), M726500200 (w/ brake)
• Leveling leg, ½” - 13 TPI x 1.54”: LFM1213566
• 6” adjustable stainless steel leg: P0121P0100

Warning: This product can expose you to chemicals including Bisphenol A(BPA) and Di (2-ethylhexyl) phthalate (DEHP) and
Cobalt sulfate heptahydrate, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, go to www.p65warnings.ca.gov.

• (1) stainless steel glide lid
• (2) adjustable heavy-duty PE coated shelves
•  4.56 cu.ft.
• 115v/60/1
• NEMA 5-15P
• 0.9 Amps
• 1/8 HP

Installation and use

Install indoors at 50–100°F on a strong, level floor, with front casters locked. Leave at least 5 inches behind the cabinet, keep ventilation clear and use a dedicated grounded outlet without an extension cord. Run the cabinet for 24 hours before loading. R600a is flammable; have the installer confirm room volume against the nameplate charge, allowing at least 1 m³ per 8 g of refrigerant. Glass frosters do not include a bottle-opener kit.

Defrosting and care

Defrost when frost exceeds 10 mm (3/8 inch). Empty the cabinet, unplug it and leave the lid open. Drain the meltwater, replace the drain plug and dry the interior. Never puncture tubing or accelerate defrosting with mechanical tools.

Unplug before cleaning with warm soapy water and a soft cloth; avoid abrasives and chlorine cleaners. Empty the drain pan periodically and return its hose. The automatic brush may not remove grease: arrange qualified condenser service with nitrogen once or twice yearly. Wait five minutes before restarting.

Compare glass and mug frosters

Stainless steel exterior · Black exterior

Documents and warranty

24-inch glass froster specifications and drawings · TBC installation and operation manual · Warranty terms and eligibility