Skip to content
Eden Restaurant Supply
Cart 0

Turbo Air SAK-70L-N 71" Stainless Steel Curved Glass Refrigerated Sushi Case - Left Side Condenser

SAK-70L-N
Turbo Air curved-glass refrigerated sushi display case with stainless steel cabinet
SAK-70L-N original manufacturer technical page with plan, front and side views. The sheet explicitly labels both left and right condenser versions; use the SAK-70L-N drawing.

Turbo Air SAK-70L-N curved-glass sushi display case with 2.1 cu. ft. capacity, 5 stainless steel bottom shelves and a left-side condenser viewed from the front. 304 stainless steel exterior, chef-side Low-E tempered-glass doors and 35–41°F holding temperature.

In Stock
Shipping calculated at checkout.

Product overview

Turbo Air SAK-70L-N is a refrigerated sushi case with a 71″ marketed length and a left side condenser when viewed from the front. Exact case dimensions are 71¼″W × 14⅛″D × 11½″H, excluding the drain.

  • Capacity: 2.1 cu. ft.
  • Condenser: Left side, viewed from the front
  • Food display: 5 stainless steel bottom shelves

Features

Hydrocarbon refrigerants (R-290)
These hydrocarbon refrigerators are designed to meet DOE's Energy Conservation Standards in 2017 and to use EPA's SNAP Program approved HC refrigerants. Hydrocarbon refrigerants do not deplete the ozone layer and have very low contribution to global warming (ODP-0, GWP-3).


Ambient temperature range 50°F ~ 80°F, saturation temperature 39°F

Curved, downward-angled front glass

1" diameter drain hole with plastic cover

Slightly inclined bottom for better drainage

Spacious display interior

Stainless steel solid food plates

Low-E coated, tempered glass doors with durable plastic door handles at chef side

Stainless steel exterior body

Side mount compressor makes it easy to be serviced without being moved

Contemporary Euro design

Easy-clean, durable construction

Condenser located on the left from the front view

Drain hole locates on left from the chef side

Refrigerator maintains 35°F ~ 41°F for the best in food preservation


Standard features: 
- Anti-corrosion coated evaporator
- Self-contained system
- Simple plug-in installation
- Recommended operating conditions: SAK models are designed to operate in environments where temperature & humidity do not exceed 75°F and 55% relative humidity.


Warning: This product can expose you to chemicals including Bisphenol A(BPA) and Di (2-ethylhexyl) phthalate (DEHP) and
Cobalt sulfate heptahydrate, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
For more information, go to www.p65warnings.ca.gov.

  • (5) bottom shelves
  • 1" drains
  • 1/6 HP
  • 115v/60/1
  • 4.6 Amps
  • NEMA 5-15P

Specifications

Turbo Air SAK-70L-N specifications
Model SAK-70L-N
Condenser location Left (front view)
Marketed length 71 inches
Exterior dimensions (W × D × H) 71¼ × 14⅛ × 11½ inches (body; excludes drain)
Overall depth including drain 14¾ inches
Interior dimensions (W × D × H) 56⅞ × 12 × 6½ inches
Net capacity 2.1 cu. ft.
Sliding doors 4
Bottom shelves 5
Shelf dimensions (L × D) 11 × 11 inches
Electrical 115V / 60Hz / 1 phase
Full-load amperage 4.6 A
Plug NEMA 5-15P
Cord length 4⅞ ft.
Compressor 1/6 HP
Refrigerant R-290
Holding temperature 35–41°F
Recommended operating conditions At or below 75°F and 55% relative humidity
Exterior construction 304 stainless steel
Front glass Curved
Chef-side doors Low-E coated, tempered glass
Certifications cETLus; ETL
Net weight 98 lb
Manufacturer gross/crated weight 120 lb

Body depth excludes the ⅝″ drain. Manufacturer shipping weight may vary with additional protective packing. Case dimensions are not crated dimensions.

Warranty: 2 year parts and labor warranty, plus an additional 3 year compressor warranty (U.S.A. only). Manufacturer terms and exclusions apply.

Manufacturer Resources & Downloads

View Turbo Air manufacturer product information

Installation and loading

Install indoors on a level, stable surface, away from direct sunlight, HVAC vents, fans and doorways. Keep ventilation openings clear and allow the installation clearances specified for the delivered case. Keep food within the shelf edges and clear of the rear wall and air inlet. Cool the empty case to the required temperature before loading; do not add hot food.

Have a qualified installer provide a grounded, dedicated electrical connection. The installation manual specifies a minimum 20-amp dedicated outlet and minimum 12 AWG wiring. Do not use an extension cord or adapter. For R-290, provide at least 1 m³ of room volume per 8 g of refrigerant, based on the charge shown on the cabinet label. Protect the refrigerant tubing and keep ignition sources away. Do not use mechanical tools to accelerate defrosting or unapproved electrical appliances inside the food compartment.

Operation and cleaning

The SAK power switch is at the bottom of the rear panel. Before cleaning, switch off and disconnect power, remove food and let the case reach room temperature. Keep electrical components dry. Remove the shelves and bottom trays, wash the interior with warm water and mild detergent, then wipe away soap residue with a damp cloth. Avoid harsh cleaners.

Clean the condenser monthly, or more often when needed. With power disconnected, remove the louver and brush dust and lint from the condenser fins; refit the louver before reconnecting power. Refrigerant service and repairs require trained personnel.

Compare sizes and condenser positions

SAK-50R-N · SAK-60R-N · SAK-70L-N · SAK-70R-N · SAK-50L-N · SAK-60L-N